For fixing GripTec GTB-connecting bars (A) to the formwork.

Attention: rod length excluding thread

Use of the special spanner is essential here. Attachment for 1/2" ratchet spanner, or turn with steel bar.

For fixing GripTec GTB socket bar (M) to the formwork.

Trapeziodal strip for GripTec GTB
Punched to order depending on bar diameter (standard length 1 metre).

Agenda:
a = end spacing
e = bar spacing
GripTec GTB-60: h = 3.5 cm, b = 6.0 cm, b1 = 4.8 cm
GripTec GTB-90: h = 5.0 cm, b = 9.0 cm, b1 = 7.0 cm

Please state end spacing (a) and bar spacing (e) when ordering.

Standard coupling GripTec GTB-A + GTB-M for straight and bent, free-rotating rebars.

Reducing coupling GripTec GTB-R for straight and bent, free-rotating rebars of different diameter.

Positioning coupling GripTec GTB-P I / P I repair for straight and bent, not free-rotating and / or longitudinally fixed rebars (PI).

Positioning coupling GripTec GTB-P II for straight and bent, not free-rotating and / or longitudinally fixed rebars (PII).

End anchor GripTec GTB-EV to transmit the bar strength in the concrete.

Weldable socket GripTec GTB-AN for connection to structural steelwork with Bst 500 S steel.

Stainless steel connector GripTec GTB-EK for use in areas at risk of corrosion.

Steel construction connector GripTec GTB-STB for connecting with metric screws.

Torque wrench for GripTec GTB screw connectors, self-locking, convenient to use with one hand.

GripTec GTB screw connections are supplied bent on request. Minimum dimension x of the sleeve shank (for GTB-A or GTB-M) depending on the mandrel diameter in accordance with DIN 1045-1.