...the trimmings matter most.

Special sealing mortar

Ready-to-use premixed mortar based on cement, grain size 0 to 0,32 mm. For sealing tapered and anchor holes and for repairs.

  • Does not shrink during curing
  • High early strength and very high final strength
  • Multi-purpose mortar, including for refinishing
  • Application with mortar gun
Instructions for use:
  • Water requirement: depending on size of tapered/anchored hole or damage, between 16% and 20% or 4 l to 5 l water per 25 kg mortar
  • Mix all the mortar with approx. 2/3 of the water
  • Add the rest of the water while mixing
  • Mixing time approx. 4 minutes
  • Do not use below 5°C
Consumption:
  • One bag yields 13 l sealing mortar
  • Cone EX in conjunction with FLUPP: approx. 500 holes per bag
  • Cone EX hole, e.g. EX 22/10 and EX FB: approx. 1,200 holes per bag
  • MKK® BETOMAX 15 tapered holes: approx. 60 holes per bag
  • Size 22 tubular spreaders: per bag approx. 30 m tubular spreader (inside Ø 22), e.g. Dist K-22 spacer tube, rough

StarCret all-purpose filler

Ready-to-use premixed filler based on cement, modified with plastic. For repairs, coatings and smoothing and levelling concrete, plaster and mortar. Especially for cosmetic repairs to fairfaced concrete indoors and outdoors. Grain size 0 - 0.3 mm

  • High tensile bending strength
  • Consistent quality and colour (pale concrete, no colouring pigments)
Instructions for use:
  • Surface must be cleaned and pre-wetted
  • Water requirement approx. 3.3 l per 15 kg tub
  • Mix to obtain a consistency suitable for spreading with a blade
  • Pot life approx. 60 minutes at 20°C
Consumption:
  • 15 kg premixed filler yields approx. 7.5 litres fresh filler
  • Apply in layers of 1.5 - 5 mm

Mortar grout

Ready-to-use premixed mortar based on cement. Self-leveling, does not shrink.

For underpouring/grouting in foundation slabs, machine frames, precast concrete parts, anchors, bridge bearings, manhole covers and similar, without cavities.

  • High tensile bending strength
  • Resistant to frost and road salt
Instructions for use:
  • Water requirement: depending on flow property, 3,5 l per 25 kg
  • Mixing time approx. 4-6 minutes
  • Pot life approx. 60 minutes at 20°C
Verbrauch:
  • 25 kg mortar yields 13 litre mortar grout

Sealing mortar

Ready-to-use premixed mortar based on cement, for sealing tapered and anchor holes. Grain size 0 to 4 mm.

  • Controlled volumne change during curing
  • High early strength and very high final strength
  • Additional protection against water penetration
Instructions for use:
  • Water requirement: depending on size of tapered hole, between 14% and 18%, or 3.5 l - 4.5 l water per 25 kg mortar
  • Mix all the mortar with approx. 2/3 of the water
  • Add the rest of the water while mixing
  • Mixing time approx. 4 minutes
  • Do not use below 5°C
Consumption:
  • One bag yields 13 l sealing mortar
  • Cone EX in conjunction with FLUPP: approx. 500 holes per bag
  • Cone EX hole, e.g. EX 22/10 and EX FB: approx. 1,200 holes per bag
  • MKK® BETOMAX 15 tapered holes: approx. 60 holes per bag
  • Size 22 tubular spreaders: per bag approx. 30 m tubular spreader (inside Ø 22), e.g. Dist K-22 spacer tube, rough