...we keep the distance

2-component adhesive tin 

Test report (in German)

Epoxy resin adhesive. For making waterproof resilient joints with fibrous concrete and fair-faced concrete plugs.

  • The components are colour-coded: component A is white component B is black
  • Mixing ratio 1:1
  • Test report as recommended by German KTW
Instructions for use:
  • Mixing time: until the adhesive is free from streaks
  • The surfaces being joined must be free from dust and grease
  • Pot life: 2 - 2.5 hours at +20°C, min. working temperature 8°C
  • Reaction temperature:50-60°C
  • 1 kg of adhesive is sufficient for approx. 40 concrete plugs MKK® B 15
  • 1 kg of adhesive is sufficient for approx. 150 fibrous concrete plugs FB 22/50 mm

Test certificate for water impermeability test (in German)
Water impermeability test for Water Stop 120 Dist. St 22 with cone Ex 22/50 (in German)

2-component adhesive cartridge

Epoxy resin adhesive. For making waterproof resilient joints with fibrous concrete plugs and fair-faced concrete plugs.

  • Twin cartridge contains components A and B
  • Components blended by mixing nozzle
  • Test report as recommended by German KTW
Instructions for use:
  • The surfaces being joined must be free from dust and grease
  • Minimum working temperature 8°C
  • One kg of adhesive ist sufficient for approx. 40 concrete plugs MKK®B 15
  • One kg of adhesive is sufficient for approx. 150 fibrous concrete plugs FB 22/50 mm

Cleaning brush

For cleaning bonding surfaces in the fibrous concrete tube.

Fibrous concrete plug

For making a flush and waterproof seal at the end of fibrous concrete tubes or SBK®/CBK®. Bonded with the 2-component adhesive.

Filling funnel

Facilitates filling mortar gun with sealing mortar.

Mortar gun

For filling cavities in spreaders and cones with sealing mortar.

Puller

Tool for pulling out sealing cap.

Plastic plug

Driven into the fibrous concrete spacer tube with the steel bore gauge to act as an abutment for bonding the fibrous concrete plug.

Round brush for mortar work

For pre-wetting the inside of the fibrous concrete tube.

Stirrer

For stirring BETOMAX® mortar products. Attaches to power drill.

Power Hit

Two-component synthetic resin mortar for anchoring rebars and threaded bars and sleeves in all customary building materials without exerting any expansion pressure.

  • Reliable long-term behaviour
  • High load values
  • No foil packaging
  • Mechanical damage to cartridge practically ruled out

Steel bore gauge

Tool for driving the plastic plug into the fibrous concrete tube.

Sealing cap

For sealing fibrous concrete spacer tubes on the formwork.

Coupling

Plastic connecting piece for fibrous concrete (FB 22) and plastic spacer tubes.

Coupling St.-22/FB 22

Plastic connecting piece for steel spacer tube 22 with fibrous concrete spacer tube
(FB 22).

Steel spacer tube cut size = wall thickness - 5 mm
(5 mm for both couplings, disregarding deduction for taper)

Cone EX 22

Cone is inserted in the fibrous concrete spacer tube and removed with the cone key.