Product video:
Our COMAX® software
»
For fixing GripTec GTBsocket bar (M) to the formwork.
Downloads
For fixing GripTec GTB-connecting bars (A) to the formwork.
Attention: rod length excluding thread
Use of the special spanner is essential here. Attachment for 1/2" ratchet spanner, or turn with steel bar.
Attention: rod length excluding thread
Use of the special spanner is essential here. Attachment for 1/2" ratchet spanner, or turn with steel bar.
Downloads
Trapeziodal strip for GripTec GTB
Punched to order depending on bar diameter (standard length 1 metre).
Agenda:
a = end spacing
e = bar spacing
GripTec GTB-60: h = 3.5 cm, b = 6.0 cm, b1 = 4.8 cm
GripTec GTB-90: h = 5.0 cm, b = 9.0 cm, b1 = 7.0 cm
Please state end spacing (a) and bar spacing (e) when ordering.
Punched to order depending on bar diameter (standard length 1 metre).
Agenda:
a = end spacing
e = bar spacing
GripTec GTB-60: h = 3.5 cm, b = 6.0 cm, b1 = 4.8 cm
GripTec GTB-90: h = 5.0 cm, b = 9.0 cm, b1 = 7.0 cm
Please state end spacing (a) and bar spacing (e) when ordering.
Downloads
Torque wrench for GripTec GTB screw connectors, self-locking, convenient to use with one hand.
Downloads
Standard coupling GripTec GTB-A + GTB-M for straight and bent, free-rotating rebars.
Downloads
Reducing coupling GripTec GTB-R for straight and bent, free-rotating rebars of different diameter.
Downloads
Positioning coupling GripTec GTB-P I / P I repair for straight and bent, not free-rotating and / or longitudinally fixed rebars (PI).
Downloads
Positioning coupling GripTec GTB-P II for straight and bent, not free-rotating and / or longitudinally fixed rebars (PII).
Downloads
Weldable socket GripTec GTB-AN for connection to structural steelwork with Bst 500 S steel.
Downloads
End anchor GripTec GTB-EV to transmit the bar strength in the concrete.
Downloads
Stainless steel connector GripTec GTB-EK for use in areas at risk of corrosion.
Downloads
Stahlbau Konnektor GripTec GTB-STB zur Verbindung mit metrischen Schrauben.
Sechskantschraube ist bauseits zu stellen.
Downloads
GripTec GTB screw connections are supplied bent on request. Minimum dimension x of the sleeve shank (for GTB-A or GTB-M) depending on the mandrel diameter in accordance with DIN 1045-1.