Typ WH / WH 2reihig
Winkel mit Haken in Blechrichtung, zweischnittig als Doppelwinkel (-Haken) auch mit unterschiedlichen Stahldurchmessern lieferbar.
Element- breite | Blechtyp | BSt Ø | Bügel- abstand | Bügel- breite | Bügel- höhe | Verankerungslänge für Elementlänge | |
---|---|---|---|---|---|---|---|
mm | P/Q/L | 8/10/12 | e in cm | b in cm | h in cm | 83 cm l in cm | 125 cm l in cm |
60 | P | 8 | 10 | 8 | 8 - 98 | max. 41 | max. 41 |
60 | P | 8 | 15 | 8 - 12 | 8 - 98 | max. 45 | max. 67 |
60 | P | 8 | 20 | 8 - 17 | 8 - 98 | max. 49 | max. 69 |
60 | P | 10 | 10 | 8 | 10 - 98 | max. 31 | max. 31 |
60 | P | 10 | 15 | 8 - 12 | 10 - 98 | max. 44 | max. 46 |
60 | P | 10 | 20 | 8 - 17 | 10 - 98 | max. 48 | max. 58 |
60 | P | 12 | 10 | 8 | 12 - 98 | max. 23 | max. 23 |
60 | P | 12 | 15 | 8 - 12 | 12 - 98 | max. 35 | max. 35 |
60 | P | 12 | 20 | 8 - 17 | 12 - 98 | max. 48 | max. 51 |
80 | P | 8 | 10 | 8 | 8 - 98 | max. 43 | max. 64 |
80 | P | 8 | 15 | 8 - 12 | 8 - 98 | max. 45 | max. 67 |
80 | P | 8 | 20 | 8 - 17 | 8 - 98 | max. 49 | max. 70 |
80 | P | 10 | 10 | 8 | 10 - 98 | max. 42 | max. 45 |
80 | P | 10 | 15 | 8 - 12 | 10 - 98 | max. 45 | max. 65 |
80 | P | 10 | 20 | 8 - 17 | 10 - 98 | max. 47 | max. 68 |
80 | P | 12 | 10 | 8 | 12 - 98 | max. 38 | max. 38 |
80 | P | 12 | 15 | 8 - 12 | 12 - 98 | max. 42 | max. 58 |
80 | P | 12 | 20 | 8 - 17 | 12 - 98 | max. 48 | max. 67 |
110 | P/Q/L | 8 | 10 | 8 | 8 - 98 | max. 44 | max. 64 |
110 | P/Q/L | 8 | 15 | 8 - 12 | 8 - 98 | max. 46 | max. 67 |
110 | P/Q/L | 8 | 20 | 8 - 17 | 8 - 98 | max. 49 | max. 70 |
110 | P/Q/L | 10 | 10 | 8 | 10 - 98 | max. 43 | max. 63 |
110 | P/Q/L | 10 | 15 | 8 - 12 | 10 - 98 | max. 44 | max. 66 |
110 | P/Q/L | 10 | 20 | 8 - 17 | 10 - 98 | max. 48 | max. 69 |
110 | P/Q/L | 12 | 10 | 8 | 12 - 98 | max. 43 | max. 62 |
110 | P/Q/L | 12 | 15 | 8 - 12 | 12 - 98 | max. 44 | max. 66 |
110 | P/Q/L | 12 | 20 | 8 - 17 | 12 - 98 | max. 48 | max. 69 |
Die Werte e, b, h und l sind variabel in Abhängigkeit von Elementbreite, Blechtyp und BSt Ø. Die Verankerungslänge gilt nur für einreihige Elemente mit Standardlochung.
Technische Änderungen vorbehalten. Die Maße wie auch die Kombination der Maximalwerte sind im Einzelfall abzustimmen.
Aufgelistet sind Ausführungsbeispiele.